AC50

System Description

Max. Number of Stations:	10 stations with 10 destinations total
Max. Number of Zones:	1 (one)
Arrival Signals per station:	2 per station; maximum 10 per system
Diverters:	2-way, 3-way
Operation Modes:	Single tube-Reversing operation Semi-automatic operation

System Example

In this system, at any station carriers can be inserted, but the operation mode of the system must be taken into consideration. At the time, a carrier is running, short waiting times will come up, until the carrier has reached its destination. After this a next carrier can be inserted and will be immediately transported. The system can be universally designed, allowing mixing of through- and end-stations.

Variable microprocessor controls for the coordination and monitoring of all functions.

Features of the AC50 System

A separately housed control center with transparent cover acts as the brain of the system and monitors all system functions
All stations can communicate with one another.
System layout as desired, branching through two- and three-way-diverters possible.
Different station types
Pneumatically deceleration of arriving carriers, depending to the system layout.
System length up to 500 m, for installation between several buildings by open air- or underground lines
Power pack for the supply of the complete system
Keyboard for entering system datas and display for service functions and system informations
LED-indication of additional informations about blower, carrier brakes, monitoring of tube switches a.s.o.
2 different interfaces for serial data transfer, through this the central controls can be places in the system as desired.
Serial current-loop printer interface
Programming mode. A service technician programs the system datas (topography) by means of the keyboard in the front panel of the central controls.
Electronic overlap safeguard recognises a situation where two or more carriers are transmissioned at the same time (for example in case of open stations), recognises the error and automatically returns the carriers to their point of origin.
A transmission controller will automatically return the system to a state of readiness if a transmission is begun without a carrier being introduced into the system.
Autostart automatically continues each sending process after power recovery, by sending the carrier to the correct destination.
With the addition of a compatible printer the CCU will print out a log of all transmissions. Information includes, date, time, sending and receiving stations and the continous sending number. Backdated the last 120 sending processes are recallable.
In a service mode, all system devices can be exercised and analysed from the CCU. Fault indications will be displayed.
Automatically or manual clearing.
Halt-mode. The system can be blocked for further transmissions.

Station Types	Tube Diameter (mm)
Station Types	OD 63	ND 75	OD 90	ND 100	OD 110	ND 124	OD 160	OD 200
OE
Slide Station
Door Station

For more information, contact Aerocom® sales.
For downloadable information on this system, click here.